Water softener installation

On water this hard, an undersized softener regenerates constantly. Sizing is everything.

Installing a water softener in Midland means sizing it for some of the hardest city water in Texas and fitting it into a garage or utility space, since most homes here are built on slabs. This page is for homeowners on city water or a well who are buying their first softener or replacing a builder unit that was never big enough.

Signs you need one

  • Thick white scale on faucets and showerheads
  • Cloudy glasses even after the dishwasher
  • Crusty ice maker and coffee maker
  • Water heater sediment and popping
  • Soap scum on every shower surface
  • Short-lived faucets and fill valves

Why Midland water calls for a bigger unit

The City of Midland lists its hardness at 400 to 600 ppm, about 23 to 35 grains per gallon. For the same household, a softener on 30-grain water has to remove roughly three times as much hardness as one on 10-grain water. A unit sized for an average American city will regenerate far more often here, using more salt and water and wearing out sooner.

What the install involves

  1. Test. Hardness and total dissolved solids, plus iron and other basics on a well.
  2. Size. Grain capacity from hardness, household size and water use.
  3. Plumb. Connect to the softener loop if there is one, with a bypass valve and a drain with an air gap. Leave irrigation and hose bibs unsoftened.
  4. Protect. Garages here get very hot in summer and can freeze in winter; placement and insulation matter.
  5. Program. Set to the measured hardness, with demand-based regeneration.

What affects the cost

Capacity, single or twin tank, whether a loop exists, how far the main has to be rerouted, pre-filters and an RO add-on. The company quotes after seeing the house. We don't set prices.

Where we can connect you

Common questions

What size softener does a Midland home need?

It depends on hardness, household size and water use. At 23 to 35 grains, most homes need more capacity than a softener sized for typical city water.

Who can install a softener in Texas?

TCEQ requires a Water Treatment Specialist license for most paid installation and service of water treatment equipment. Plumbers holding a Texas plumbing license are exempt.

Do I need a softener loop?

It makes installation easier. Many newer Midland homes have one in the garage. Without it, the company can reroute the main line.

Related services

More background: Midland County hard water guide.

Scale on everything? Want better drinking water?

Call and we will connect you with a water treatment company that serves Midland and Odessa.

Call (432) 319-2800
Call (432) 319-2800